Plantronics bt headset manual

Contact Plantronics Support. Even though the device does have some charge out of the box, it is highly recommended to fully charge it before first use. The headset has a 5 level LED indicators which indicate the current charge. Ensure all 5 LED lights are lit up before initial usage. If you want to connect your headset with a Smartphone , Tablet or any other Bluetooth compatible device , then you would need to manually pair the device.

Additional call controls need to be configured using the Plantronics Hub software. As indicated in the picture above. Optionally, your Headset call control can be customized by installing the Plantronics Hub for Windows and Mac. Updating the firmware of the Plantronics Voyager Focus UC B headset In order to check, download and install new firmware updates, you would need to download and install the Plantronics Hub software for Windows PC or for Mac from here.

Main Page Device Update Page. Repeat to turn off multipoint. You must activate multipoint before pairing second phone. This entry was posted on July 29, by Wayne.

If phone asks for a passcode, plantronics m20 manual four zeros Activate the Bluetooth feature on your phone to start the search or discovery mode. Pairing mxnual the plantronics m20 manual to work with the Bluetooth headset for wireless communication.

Small Business — Chron. Good through July 31st. Leave a comment Please wait To view users guide: Turn on the headset. Binary data bytes, use -b option to plantronics m20 manual Has Real Merged Data: Binary data bytes, use -b option to extract Green Tone Reproduction Curve: However, there is no guarantee that interference will not occur in a particular installation.

This automatically puts your Plantronics phone in pairing mode. Listen to the Voice This headset automatically announces various status alerts, including: Some phones also ask to confirm headset connection after pairing. To answer a second call from the other phone, you must end the current call tap Call button so plantronics m20 manual call automatically answers.

Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. When adapter starts flashing red and blue release the buttons. The headset and adapter will flash blue when paired successfully. Plantronics Pulsar When the indicator light flashes red and blue, release buttons.

Start with the headset powered on. Press and hold down the call control button while also rotating the multi function dial upward away from the light until the indicator light on the headset starts flashing red then green. When prompted for passkey, enter On the adapter press and hold the blue power button for 10 seconds.

To check the battery status, the headset must be powered on. While wearing the headset short press power button and a voice alert will advise you of the talk time you have remaining on your current charge.

If you hear a beep after the remaining talk time your Smart Sensors are not calibrated properly. Remove headset from your ear and place headset flat on a non-metallic surface and connect to the AC charger or the USB cable charger for 10 seconds to recalibrate the Smart Sensors.

While not wearing your headset short press the power button and the indicator light flashes red to show the battery charge level as shown below. When the battery charge is very low, a tone and voice prompt will automatically occur. The headset comes configured for the right ear, with the medium ear tip installed, however you can replace it with the small or large ear tip provided or configure the headset to fit on the left ear.

For the best sound clarity and comfort, make sure you have a secure fit. The ear tip will stop rotating when it is locked. You may want to add an optional foam ear tip cover for additional comfort. Welcome to ManualMachine.