Nokia premicell sms software

Read messages 5. Call divert 6. Security options 7. Call info 8. Network select 9. Network monitor. Terminal settings In the terminal settings menu the options are for landline phone, antenna, terminal security and line adapter. The scale for earphone, mic and tone levels is from 1 to 5. The default setting is 3. The levels cannot be changed during a call. The power in the handset must be switched off and turned on again before the changes take effect.

The antenna mode can be changed in the Antenna select submenu. Antenna 1 has both receiver and transceiver and antenna 2 only receiver. Changes for the autopin modes can be made in the terminal security submenu. The autopin state on is the default for this menu. In this mode, if the PIN code is entered incorrectly the user is asked for the code again. The line adapter selection is only for testing purpose.

Handset settings The handset setting menu is mainly for testing purposes. The earphone, mic and tone levels can be changed for the handset. This functions in the same way for the handset as the first menu for the landline telephone.

Memory options In this menu call handling options are available. The memory can be erased call by call or all at once. This menu shows dialed, received and missed calls. Messages The submenu is for reading and writing SMS messages and changing message settings. Call divert Different kinds of call divert options can be made in this menu. Five different options are available: divert all, if busy, if no reply, if not available and cancel all. Security options The submenus in this menu are PIN code request, call barring, change codes and restore settings.

PIN codes can also be changed in this menu. Call info In this menu call timers and call costs information are available. The cost limit can be set and call information is available.

Network select The network can be selected automatically or manually. Network monitor This menu is used in installation. There are 27 different displays for testing.

In the installation display 01 gives all the necessary data. When the Network Monitor menu is active, the terminal works in a similar way as without it, except that the arrow keys scroll through the various tests, whereas they would scroll through the short code memory while the field test display is inactive. The test numbers that are not valid are not scrolled. The network monitor display is located at the end of the main menu loop. It is activated as follows:.

A colorful collection of SIM covers are available. The standard color is black but the SIM card is also available in turquoise and red. During the data display mode, the field test data are visible on the main display. During the help mode, one screen of instructions is shown for each test to make it easier to identify the test in question. The ABC button is used to toggle between these two modes.

The Nokia PremiCell terminal should be installed properly before it can be put in use. This chapter has been prepared to provide the basic information necessary to install a PremiCell terminal. This chapter suggests one way of installing the terminal. The suggested installation concepts provide only general ideas about positioning of the unit.

The installer should rely on his own skills and common sense when choosing the location. New terminals have autopin activated. If autopin is used, the terminal does not need autopin activation by the service handset.

The terminal automatically enters the pin code to the SIM card after it has been entered once. This terminal uses the small size SIM card. The card can be easily damaged by scratching or bending, so be careful when handling and inserting it. Note: Keep all miniature SIM cards out of the reach of small children. Always disconnect the operating power before the installation of a SIM card. The best guide for selecting the locations of the units is your own experience, skills and common sense.

The IOF indicates the received strength of the signal. The strength is indicated with terminal LEDs and the tone from the receiver. Indicators are updated every 1. Calls cannot be established when the terminal is in the IOF state. The installation location must be clean and dry. DC jack connector. The terminal now goes to the service state. Wait until LED 1 is on. The terminal goes to the service state. The best installation location for the terminal can also be found by observing the LEDs lights.

See Table 4 for explanations of LED lights in installation. The location of the terminal is very important. The best location can be determined with the help of the Service Handset. The easiest way to move the terminal when selecting a location is to use the installation backup battery.

The loaded backup battery can be connected to the terminal without a power supply for this limited purpose Pict. If the voice level of the telephone receiver is low, you can adjust the volume of the telephone set. If there is no volume control in the telephone set, use handset menu The service handset network monitor display no.

The pre-installation stage can be automated by WinTesla service software. See appendix 1 for details. Once the autopin request has been set, the customer cannot use any other SIM card.

IMEI code: The international mobile station equipment identity code, which can be found on the terminal. Each terminal has a unique code defined by the manufacturer. Security Code is also needed: The security code has to be used when using the handset. Upon first being connected and after a power break, it takes 20 - 30 seconds before the telephone is connected to the network. Dialing and answering the telephone is similar to using a fixed line terminal.

The delay in call processing is longer than with a fixed line due to the internal process of the Fixed Wireless terminal. Dialed digits are first saved into the memory of the transceiver. There is a few seconds waiting time after the last dialed digit. After that, the transceiver assumes that the telephone number is fully dialed, and a telephone request is sent to a network. The waiting time can be adjusted with WinTesla software. Breaks between dialed digits should not be longer than the adjusted time.

When faster call setup is in use, there is no waiting time after last dialed digit with the 10 recent used numbers. This means that either the network is not working, the signal is too weak or the antenna cable is disconnected. If this does not help, try procedure 2. When making a call, an area code must be dialed both for local calls and long distance calls if the network system does not support local area dialing or AAC is not in use see3.

Although there are separate connectors for telephone and fax, only one of them can be used at a time. These features are often called Network Services. They are special services provided by wireless telephone service providers and differ from one country to another. Check with the local wireless telephone service providers for details. If the terminal is still not working, contact the local operator or the nearest Nokia Mobile Phones representative.

The personnel there will assist you, and if necessary, arrange for service. Always check the state of the LEDs when problems are encountered. If the Fixed Wireless terminal does not work, it is important to first check that the connections are made. Check the following:. Care and Maintenance The Fixed Wireless terminal is carefully designed and manufactured. The suggestions below will help ensure that this product lasts for many years.

Non-expert handling of the transceiver may damage it. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. Special software has been designed to facilitate the servicing of Fixed Wireless terminals. Number Identification Call Offering SS Call completion In Call Handling Multiparty Call Call Transfer Completion of Calls to Busy Subscriber Fixed Destination Call Call Restriction Nokia Mobile Phones is not responsible for any loss of data, income or any consequential damage howsoever caused.

All radio transmitting devices may at times incur interference which could affect performance. Remember to make backup copies of all important data to protect against its possible loss or alteration.

Do not drop or knock the adapter, or any way handle it roughly. Do not expose the adapter to moisture or excessive heat. Do not attempt to open the data adapter. Keep the connectors of the data adapter clean. The cable to be used with this product is in the sales package. If you need additional cables, consult your dealer or network service provider in order to get a compatible cable.

For further information about different network services operational in GSM and GSM networks, please consult with your network service providers. Important Safety Information Your Data Adapter Supported Computer Types Installing the Data Adapter Introduction to Wireless Communication Flow Control Communications Applications Data Calls Short Messages An integrated analog modem is also an essential feature of the I36 terminal.

Thanks to the integrated analog modem the I36 terminal can be located up to meters from, fax and PC equipment thus giving the business user s freedom of flexible location. With the I36 terminal you have access to both fixed and wireless services.

This opens up new possibilities to offer services that normally are not available to businesses using fixed lines. Thanks to the simplicity of the I36 terminal, the installation can be carried out with ease. The I36 terminal features Remote Management capabilities that enables monitoring and management of the unit from a location of your convenience.

Download Datasheet Here. The G36 terminal offers voice, data and fax capabilities and PBX connectivity that enables substantial cost savings by turning fixed-to-mobile into mobile-to-mobile calls. With the crisp voice quality equivalent to that of a standard fixed line, high-speed data connectivity for Internet access with "Always connected" capability, multifunction fax support and PBX connectivity using a single telephony interface the G36 terminal is the definitive terminal for business needs.

An integrated analog modem is also an essential feature of the G36 terminal. Thanks to the integrated analog modem the G36 terminal can be located up to meters from, fax and PC equipment thus giving the business user s freedom of flexible location. With the G36 terminal you have access to both fixed and wireless services. Thanks to the simplicity of the G36 terminal, the installation can be carried out with ease. The G36 terminal features Remote Management capabilities that enables monitoring and management of the unit from a location of your convenience.

Download Product Manual Here. Unlike most Gateways in this price range, the CGW-T gateway comes with a built-in LCD to indicate signal strength, operational status and cellular operator name to simplify installation and operation. This product can hang vertically on a wall and several can be linked together on a mounting frame minimising the amount of wall space required.

The CGW-T gateway comes with built-in LCD to indicate signal strength, operational status and cellular operator name to simplify maintenance. The EasyGate Gateway is not only a tool for call cost reduction as it can provide other communication solutions such as sending and receiving SMS and PC fax messages, thanks to the GPRS you can browse internet and send e-mails, thanks to the FSK feature you can see the calling party on the phone if supported by the telephone - all these features are supported by the 2N EasyGate GSM Gateway.

These means of communication are widely used on boats and in distant areas. Other smart feature which is highly appreciated is a periodical gateway status SMS message, which informs you about the current signal, number of calls, etc. NEW complementary 2N product - EnergyBank - is a back-up power supply that can be used with any equipment requiring 12V supply. With this product, any 12V equipment can work for a substantially longer period of time without stable feed.

Mobile office EasyGate is also an ideal solution also for mobile offices.